HomeRefrigerator Water FiltersGEPSF26PGSCBB

PSF26PGSCBB
Exact-Fit Model Guide

Water Filter for the GE PSF26PGSCBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSF26PGSCBB replacement water filter cartridge
Replacement cartridge for this model
PSF26PGSCBB · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
high on the fresh-food side in most French-door layouts — upper back or left wall
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSF26PGSCBB · Quick Facts
Filter locationhigh on the fresh-food side in most French-door layouts — upper back or left wall
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSF26PGSCBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSF26PGSCBB specifics — where the filter actually lives

The PSF26PGSCBB carries its water filter high on the fresh-food side in most French-door layouts — upper back or left wall — usually a kneeling-height or shoulder-height swap, not a teardown. The seat is a twist-in design — a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Owners of the PSF26PGSCBB report the same friction points: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. Decode the plate and the parts question answers itself: generally a Profile French-door machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Trailing letters like BB denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

PSF vs the rest of the catalog — what the prefix tells you

Prefix families here: PSF against the rest of the catalog. Chassis first: Profile French-door (PSF) versus the neighboring layout (the rest of the catalog). The shared cartridge line covers both without adaptation. call it a 26 cubic feet box — which is why this cartridge works for a living rather than sitting decorative.

Swap it in 5 minutes

Installing the replacement water filter in the PSF26PGSCBB
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSF26PGSCBB filter questions

GE PSF26PGSCBB: how do I clear the change-filter light?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSF26PGSCBB owner’s manual page for filter status.

Can I run the GE PSF26PGSCBB with no cartridge installed?

The bay self-seals: with no cartridge the PSF26PGSCBB still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSF26PGSCBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →