Home › Refrigerator Water Filters › GE › PSF26PGSAWS
Water Filter for the Profile PSF26PGSAWS (MWF)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana

Every cartridge that fits this model — pulled live from the catalogue:
✓
PSF26PGSAWS specifics — where the filter actually lives
The filter bay on the PSF26PGSAWS upper rear of the fresh-food section in most French-door builds with interior dispensers, a deliberate placement that keeps the swap away from the door seals and drawer rails. It is a twist-lock bay: the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.
Order-day practicalities: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. Prefix literacy pays here: PSF typically codes for Profile French-door machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. That WS suffix is trim-level shorthand. GE kept the MWF bay common to every finish in the line.
PSF vs the rest of the catalog — what the prefix tells you
Prefix families here: PSF against the rest of the catalog. Ordering by prefix works because PSF means Profile French-door and the rest of the catalog means the neighboring layout in this catalog — and the cartridge pool overlaps both. capacity 26 cubic feet: a mid-to-full-size cabinet whose dispenser traffic sets the realistic change cadence.
Swap it in 5 minutes

- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water

| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
PSF26PGSAWS filter questions
PSF26PGSAWS filter light will not turn off — what is the reset step?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the PSF26PGSAWS owner’s manual lists the button location for your control panel.
GE PSF26PGSAWS: bypass plug needed without a filter?
No cap needed — the MWF bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my PSF26PGSAWS?
Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM MWF | RECOMMENDEDMWF Replacement Water Filter · 1-Pack – ClearFit | MWF Replacement Water Filter · 3-Pack – ClearFit | MWF Replacement Water Filter · 6-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $14.99 | $37.47 | $67.44 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →