Home › Refrigerator Water Filters › GE › PSF26NGWAWW
Water Filter for the GE PSF26NGWAWW (MSWF)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
PSF26NGWAWW specifics — where the filter actually lives
Where the filter actually lives: high on the fresh-food side in most French-door layouts — upper back or left wall, the same estate every Profile French-door refrigerator in this family uses. The seat is a twist-in design — half a turn of wrist work in each direction is the whole procedure; everything else is towel management.
Field notes: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. Decode the plate and the parts question answers itself: generally a Profile French-door machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. WW is finish coding: handles, colors, panel options — none of it reaches the filter bay.
PSF vs the rest of the catalog — what the prefix tells you
PSF versus the rest of the catalog is the first fork in the parts catalog: Profile French-door on the PSF side, the neighboring layout on the rest of the catalog side — the parts catalog runs the same cartridge across both. the 26 cubic feet figure in the code is the household size proxy; larger households breach the rated gallons before the calendar does.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
PSF26NGWAWW filter questions
How do I reset the filter light on the GE PSF26NGWAWW?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the PSF26NGWAWW manual’s filter section has the exact control for your trim.
Is a bypass plug required for the PSF26NGWAWW when the cartridge is removed?
You can, but unfiltered — the MSWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MSWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my PSF26NGWAWW?
Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →