Water Filter for the GE PSE29NHWGCBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSE29NHWGCBB · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

low on the fresh-food side or behind the base grille in most side-by-side layouts

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

Every cartridge that fits this model — pulled live from the catalogue:

Compatible cartridges verified for this model

We cross-checked the PSE29NHWGCBB against every cartridge family that fits its bay. ClearFit versions are on the way — get notified when they land, or find your exact fit now.

Find filters for your fridge →

✓

Verified fit for PSE29NHWGCBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

PSE29NHWGCBB specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts, the same estate every Profile side-by-side refrigerator in this family uses. Mechanically the PSE29NHWGCBB uses a twist-in cartridge: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Owners of the PSE29NHWGCBB report the same friction points: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. PSE reads as a chassis statement rather than a trim code: the PSE tag is how the catalog sorts Profile side-by-side machines — carry it into any fit checker and the right cartridge line follows. Finish letter sets like BB never alter the bay; the MWF line fits the whole set.

PSE vs PSK — what the prefix tells you

PSE and PSK are neighbors in the same Profile side-by-side family; the catalog uses them for different production runs, the parts system does not. Size class 29 cubic feet — worth knowing because a full household works a cartridge harder than the rated six months assumes.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GE PSE29NHWGCBB: how do I clear the change-filter light?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the PSE29NHWGCBB owner’s manual lists the button location for your control panel.

Can I run the GE PSE29NHWGCBB with no cartridge installed?

No — the MWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSE29NHWGCBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →