HomeRefrigerator Water FiltersGEPSC23SHTGSS

PSC23SHTGSS
Exact-Fit Model Guide

Water Filter for the GE PSC23SHTGSS (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSC23SHTGSS replacement water filter cartridge
Replacement cartridge for this model
PSC23SHTGSS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
in the lower fresh-food zone in most side-by-side layouts, knee height or below
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSC23SHTGSS · Quick Facts
Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSC23SHTGSS. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSC23SHTGSS specifics — where the filter actually lives

The filter bay on the PSC23SHTGSS in the lower fresh-food zone in most side-by-side layouts, knee height or below, the same estate every Profile side-by-side refrigerator in this family uses. This is a twist-style bay, the friendlier design: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

The recurring owner notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. One prefix, one chassis family: it usually places the machine in the Profile side-by-side family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. The SS tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

PSC vs PFS — what the prefix tells you

The PSC/PFS pair divides this family by layout — PSC machines are Profile side-by-side; PFS machines are Profile French-door. Both draw from the same cartridge line, which is why fit charts list them together. 23 cubic feet of cabinet — the dispenser sees heavy traffic at that size, and heavy traffic ages cartridges faster.

Swap it in 5 minutes

Installing the replacement water filter in the PSC23SHTGSS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSC23SHTGSS filter questions

Reset procedure for the change-filter alert on the PSC23SHTGSS?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the PSC23SHTGSS manual maps the control by panel type.

Is a bypass plug required for the PSC23SHTGSS when the cartridge is removed?

You can, but unfiltered — the MWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSC23SHTGSS?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →