Home › Refrigerator Water Filters › GE › PSC23MSWA

PSC23MSWA
Exact-Fit Model Guide

Water Filter for the Profile PSC23MSWA (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSC23MSWA replacement water filter cartridge
Replacement cartridge for this model
PSC23MSWA · Quick Facts
TYPE
refrigerator
YEARS MADE
—
FILTER LOCATION
in the lower fresh-food zone in most side-by-side layouts, knee height or below
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
PSC23MSWA · Quick Facts
Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for PSC23MSWA. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

PSC23MSWA specifics — where the filter actually lives

Where the filter actually lives: in the lower fresh-food zone in most side-by-side layouts, knee height or below — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Owners of the PSC23MSWA report the same friction points: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. Prefix literacy pays here: it usually marks a Profile side-by-side layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. Finish letter sets like WA never alter the bay; the MSWF line fits the whole set.

PSC vs PFS — what the prefix tells you

PSC or PFS: the badge difference that does (and does not) change the filter order. PSC marks Profile side-by-side builds and PFS marks Profile French-door builds. Cross-checking the prefix before ordering is faster than returning the wrong cartridge. Cabinet decode: 23 cu ft — the number that tells you whether this cartridge feeds a family-size dispenser or a compact one.

Swap it in 5 minutes

Installing the replacement water filter in the PSC23MSWA
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSC23MSWA filter questions

Filter light reset on the GE PSC23MSWA — how?

Lock in the new cartridge first, then hold the reset control for a few seconds — the PSC23MSWA manual documents the button for each panel variant.

Can I run the GE PSC23MSWA with no cartridge installed?

No cap needed — the MSWF bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSC23MSWA?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →