HomeRefrigerator Water FiltersGEPHE25PGTBFBB

PHE25PGTBFBB
Exact-Fit Model Guide

Water Filter for the GE PHE25PGTBFBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PHE25PGTBFBB replacement water filter cartridge
Replacement cartridge for this model
PHE25PGTBFBB · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
inside the fresh-food cavity, position varying with dispenser spec
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PHE25PGTBFBB · Quick Facts
Filter locationinside the fresh-food cavity, position varying with dispenser spec
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PHE25PGTBFBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PHE25PGTBFBB specifics — where the filter actually lives

On the PHE25PGTBFBB, the cartridge inside the fresh-food cavity, position varying with dispenser spec, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — one twist to release, one to lock; between them you are holding the entire service procedure.

Two quirks worth knowing before you order: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. Under the cabinet differences one thing holds: the MWF cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. That BB suffix is trim-level shorthand. GE kept the MWF bay common to every finish in the line.

Reading the PHE25PGTBFBB model code — what the digits tell you

The two digits after the letters are the cabinet size: this is a 25 cubic feet refrigerator, which sets how much dispenser work the cartridge does between changes. Cross-checking by chassis pays off here: the MWF cartridge is the one constant across the model run.

Swap it in 5 minutes

Installing the replacement water filter in the PHE25PGTBFBB
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PHE25PGTBFBB filter questions

Clearing the filter status light on a GE PHE25PGTBFBB?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PHE25PGTBFBB owner’s manual page for filter status.

Running the PHE25PGTBFBB with an empty filter bay — does it need a cap?

No bypass needed: the MWF bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PHE25PGTBFBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →