HomeRefrigerator Water FiltersGEPFSE5NJZBDSS

PFSE5NJZBDSS
Exact-Fit Model Guide

Water Filter for the GE PFSE5NJZBDSS (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PFSE5NJZBDSS replacement water filter cartridge
Replacement cartridge for this model
PFSE5NJZBDSS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
high on the fresh-food side in most French-door layouts — upper back or left wall
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PFSE5NJZBDSS · Quick Facts
Filter locationhigh on the fresh-food side in most French-door layouts — upper back or left wall
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PFSE5NJZBDSS. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PFSE5NJZBDSS specifics — where the filter actually lives

The PFSE5NJZBDSS carries its water filter high on the fresh-food side in most French-door layouts — upper back or left wall — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Practical notes from the install forums: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. The PFS prefix is the tell: it usually marks a Profile French-door layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. The SS tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

PFS vs PSK — what the prefix tells you

Prefix families here: PFS against PSK. Profile French-door versus Profile side-by-side. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. What pins the parts choice down is the media line: the MWF cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike.

Swap it in 5 minutes

Installing the replacement water filter in the PFSE5NJZBDSS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PFSE5NJZBDSS filter questions

Clearing the filter status light on a GE PFSE5NJZBDSS?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the PFSE5NJZBDSS manual’s filter section has the exact control for your trim.

Will the GE PFSE5NJZBDSS dispense water without a filter cartridge?

No — run it empty if you like; the MWF bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PFSE5NJZBDSS?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →