HomeRefrigerator Water FiltersGELSS25XSWA

LSS25XSWA
Exact-Fit Model Guide

Water Filter for the GE LSS25XSWA (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

LSS25XSWA replacement water filter cartridge
Replacement cartridge for this model
LSS25XSWA · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
inside the fresh-food cavity, position varying with dispenser spec
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
LSS25XSWA · Quick Facts
Filter locationinside the fresh-food cavity, position varying with dispenser spec
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for LSS25XSWA. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

LSS25XSWA specifics — where the filter actually lives

The LSS25XSWA carries its water filter inside the fresh-food cavity, position varying with dispenser spec, a spot that survives trim changes across the refrigerator run. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Practical notes from the install forums: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. One more anchor for the parts search: the MSWF cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. WA is finish coding: handles, colors, panel options — none of it reaches the filter bay.

Reading the LSS25XSWA model code — what the digits tell you

The two digits after the letters are the cabinet size: this is a 25 cu ft refrigerator, which sets how much dispenser work the cartridge does between changes. What stays constant across the trim range: whatever the door count, the cartridge answer for this chassis is the MSWF family.

Swap it in 5 minutes

Installing the replacement water filter in the LSS25XSWA
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LSS25XSWA filter questions

Clearing the filter status light on a GE LSS25XSWA?

The reset is a press-and-hold on the filter control with the cartridge in place; check the LSS25XSWA owner’s manual for where that control sits on your panel.

Will the GE LSS25XSWA dispense water without a filter cartridge?

No — the MSWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my LSS25XSWA?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →