Water Filter for the GE HSS25ATHBB (XWF)

Your GE refrigerator takes the XWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

HSS25ATHBB · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

bottom of the fresh-food column or at the grille line in most side-by-side builds

FILTER SLOT

XWF/MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

HSS25ATHBB · Quick Facts

Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds

Filter slotXWF/MWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for HSS25ATHBB. Cross-checked against GE service documentation — this model family uses the XWF bay with Note: RFID adjacency: XWF/XWFE replaces XWF only, NOT interchangeable with RPWFE (RFID) – see guide.

Not your model? Check the finder →

HSS25ATHBB specifics — where the filter actually lives

On the HSS25ATHBB, the cartridge bottom of the fresh-food column or at the grille line in most side-by-side builds — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Owners of the HSS25ATHBB report the same friction points: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. The HSS in HSS25ATHBB is doing real work: count on HSS to place this unit among side-by-side builds; that placement carries the water-path geometry with it. Trim code BB: cosmetic variants of one chassis, one cartridge family.

HSS vs GSS — what the prefix tells you

Both HSS and GSS sit in the side-by-side class — the split inside the class is generation and trim era, not cartridge line. Size class 25 cubic feet — worth knowing because a full household works a cartridge harder than the rated six months assumes.

Swap it in 5 minutes

How to install the water filter in the HSS25ATHBB

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

HSS25ATHBB filter questions

Reset procedure for the change-filter alert on the HSS25ATHBB?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the HSS25ATHBB owner’s manual lists the button location for your control panel.

Is a bypass plug required for the HSS25ATHBB when the cartridge is removed?

No — run it empty if you like; the XWF bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM XWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my HSS25ATHBB?

Every six months or at the rated gallon capacity, whichever comes first — the XWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM XWF cartridge

This bay takes the OEM XWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →