Water Filter for the GE GSS27RGPABB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSS27RGPABB · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GSS27RGPABB · Quick Facts

Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

Filter slotMWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSS27RGPABB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

GSS27RGPABB specifics — where the filter actually lives

The GSS27RGPABB carries its water filter at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, the same estate every side-by-side refrigerator in this family uses. Mechanically the GSS27RGPABB uses a twist-in cartridge: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Order-day practicalities: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Read the prefix and the maintenance writes itself: GSS marks the side-by-side line in GE’s catalog, so cross-referencing cartridges by chassis rather than by door style keeps you out of the wrong-parts queue. BB is finish coding: handles, colors, panel options — none of it reaches the filter bay.

GSS vs PSS — what the prefix tells you

Two prefixes, two missions: split by cabinet mission (side-by-side versus Profile side-by-side), joined by cartridge line — that is the GSS/PSS story. capacity 27 cubic feet: a mid-to-full-size cabinet whose dispenser traffic sets the realistic change cadence.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSS27RGPABB filter questions

How to reset the water filter indicator: GE GSS27RGPABB?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the GSS27RGPABB manual’s filter section has the exact control for your trim.

Can I run the GE GSS27RGPABB with no cartridge installed?

No — run it empty if you like; the MWF bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSS27RGPABB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →