Water Filter for the GE GSS25XGPEWW (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSS25XGPEWW · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

in the lower fresh-food zone in most side-by-side layouts, knee height or below

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GSS25XGPEWW · Quick Facts

Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below

Filter slotMWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSS25XGPEWW. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

GSS25XGPEWW specifics — where the filter actually lives

The GSS25XGPEWW carries its water filter in the lower fresh-food zone in most side-by-side layouts, knee height or below, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically it is a quarter-turn twist-in seat: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

The recurring owner notes: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. The GSS in GSS25XGPEWW is doing real work: it places the machine in GE’s side-by-side family, which pins down the cartridge line, the reset behavior, and the service documentation worth consulting. The WW tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

GSS vs PSS — what the prefix tells you

Same parts shelf, two cabinet missions — Chassis first: side-by-side (GSS) versus Profile side-by-side (PSS). The shared cartridge line covers both without adaptation. call it a 25 cubic feet box — which is why this cartridge works for a living rather than sitting decorative.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSS25XGPEWW filter questions

How to reset the water filter indicator: GE GSS25XGPEWW?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GSS25XGPEWW owner’s manual lists the button location for your control panel.

Can I run the GE GSS25XGPEWW with no cartridge installed?

The bay self-seals: with no cartridge the GSS25XGPEWW still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSS25XGPEWW?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →