HomeRefrigerator Water FiltersGEGSS25TGPBWW

GSS25TGPBWW
Exact-Fit Model Guide

Water Filter for the GE GSS25TGPBWW (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSS25TGPBWW replacement water filter cartridge
Replacement cartridge for this model
GSS25TGPBWW · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
behind the lower fresh-food trim or base grille in most side-by-side layouts
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GSS25TGPBWW · Quick Facts
Filter locationbehind the lower fresh-food trim or base grille in most side-by-side layouts
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GSS25TGPBWW. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

GSS25TGPBWW specifics — where the filter actually lives

The GSS25TGPBWW carries its water filter behind the lower fresh-food trim or base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the GSS25TGPBWW uses a twist-in cartridge: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Practical notes from the install forums: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The GSS in GSS25TGPBWW is doing real work: it places the machine in GE’s side-by-side family, which pins down the cartridge line, the reset behavior, and the service documentation worth consulting. The WW ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.

GSS vs PSS — what the prefix tells you

The catalog pairs GSS with PSS, and the split matters at order time: GSS covers side-by-side, while PSS covers Profile side-by-side. The cartridge line is usually shared across both — order by chassis, not by door count. Capacity check: the 25 cu ft in the code is the box size, and bigger boxes push more water through the same cartridge between swaps.

Swap it in 5 minutes

Installing the replacement water filter in the GSS25TGPBWW
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSS25TGPBWW filter questions

How to reset the water filter indicator: GE GSS25TGPBWW?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the GSS25TGPBWW manual’s filter section has the exact control for your trim.

Can I run the GE GSS25TGPBWW with no cartridge installed?

No bypass needed: the MWF bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSS25TGPBWW?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →