Water Filter for the GE GSS25LGTECC (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSS25LGTECC · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

low on the fresh-food side or behind the base grille in most side-by-side layouts

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GSS25LGTECC · Quick Facts

Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts

Filter slotMWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSS25LGTECC. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

GSS25LGTECC specifics — where the filter actually lives

The GSS25LGTECC carries its water filter low on the fresh-food side or behind the base grille in most side-by-side layouts, the same estate every side-by-side refrigerator in this family uses. It is a twist-lock bay: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Two quirks worth knowing before you order: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. The badge reads GSS25LGTECC, but the chassis reads GSS: it places the machine in GE’s side-by-side family, which pins down the cartridge line, the reset behavior, and the service documentation worth consulting. The CC ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.

GSS vs PSS — what the prefix tells you

GSS versus PSS is the first fork in the parts catalog: The door count differs — side-by-side against Profile side-by-side — but the bay and the cartridge order do not. read the code as 25 cubic feet of capacity, which tells you the cartridge’s real workload between changes.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSS25LGTECC filter questions

Filter light reset on the GE GSS25LGTECC — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GSS25LGTECC owner’s manual lists the button location for your control panel.

Is a bypass plug required for the GSS25LGTECC when the cartridge is removed?

You can, but unfiltered — the MWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSS25LGTECC?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →