Water Filter for the GE GSS23HGHWW (XWF)

GSS23HGHWW specifics — where the filter actually lives

The GSS23HGHWW carries its water filter bottom of the fresh-food column or at the grille line in most side-by-side builds — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

The small print owners learn the hard way: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. Prefix literacy pays here: GE uses it across the side-by-side range, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts catalog. Trailing letters like WW denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

GSS vs PSS — what the prefix tells you

The GSS/PSS pair divides this family by layout — GSS machines are side-by-side; PSS machines are Profile side-by-side. Both draw from the same cartridge line, which is why fit charts list them together. 23 cubic feet of cabinet — the dispenser sees heavy traffic at that size, and heavy traffic ages cartridges faster.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSS23HGHWW filter questions