HomeRefrigerator Water FiltersGEGSS22WGPHWW

GSS22WGPHWW
Exact-Fit Model Guide

Water Filter for the GE GSS22WGPHWW (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSS22WGPHWW replacement water filter cartridge
Replacement cartridge for this model
GSS22WGPHWW · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GSS22WGPHWW · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GSS22WGPHWW. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

GSS22WGPHWW specifics — where the filter actually lives

The filter bay on the GSS22WGPHWW bottom of the fresh-food column or at the grille line in most side-by-side builds — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: one twist to release, one to lock; between them you are holding the entire service procedure.

Practical notes from the install forums: the line is still live when you open the bay, so keep a towel in reach, and expect the filter-status light to need a reset before it believes the new cartridge. The GSS prefix is the tell: the GSS run is GE’s side-by-side series; across the run, the filter bay is one of the constants. Finish letter sets like WW never alter the bay; the MWF line fits the whole set.

GSS vs PSS — what the prefix tells you

GSS or PSS: the badge difference that does (and does not) change the filter order. The door count differs — side-by-side against Profile side-by-side — but the bay and the cartridge order do not. Size class 22 cu ft — worth knowing because a full household works a cartridge harder than the rated six months assumes.

Swap it in 5 minutes

Installing the replacement water filter in the GSS22WGPHWW
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSS22WGPHWW filter questions

Filter light reset on the GE GSS22WGPHWW — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GSS22WGPHWW owner’s manual lists the button location for your control panel.

GSS22WGPHWW with no water filter installed — safe, or does it need a bypass?

No — run it empty if you like; the MWF bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSS22WGPHWW?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →