HomeRefrigerator Water FiltersGEGSL25WGPJBS

GSL25WGPJBS
Exact-Fit Model Guide

Water Filter for the GE GSL25WGPJBS (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSL25WGPJBS replacement water filter cartridge
Replacement cartridge for this model
GSL25WGPJBS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
behind the lower fresh-food trim or base grille in most side-by-side layouts
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GSL25WGPJBS · Quick Facts
Filter locationbehind the lower fresh-food trim or base grille in most side-by-side layouts
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GSL25WGPJBS. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

GSL25WGPJBS specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it behind the lower fresh-food trim or base grille in most side-by-side layouts, a spot that survives trim changes across the GSL run. Mechanically the GSL25WGPJBS uses a twist-in cartridge: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Owners of the GSL25WGPJBS report the same friction points: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. Prefix literacy pays here: generally a side-by-side variant machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Finish codes such as BS change the look, not the plumbing — order the cartridge by model, ignore the finish letter.

GSL vs GSS — what the prefix tells you

The GSL/GSS pair divides this family by layout — split by cabinet mission (side-by-side variant versus side-by-side), joined by cartridge line — that is the GSL/GSS story. The digits in the model number read as cabinet capacity (25 cubic feet), a decent proxy for how hard the filter works in daily service.

Swap it in 5 minutes

Installing the replacement water filter in the GSL25WGPJBS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSL25WGPJBS filter questions

How to reset the water filter indicator: GE GSL25WGPJBS?

Lock in the new cartridge first, then hold the reset control for a few seconds — the GSL25WGPJBS manual documents the button for each panel variant.

Can I run the GE GSL25WGPJBS with no cartridge installed?

Nothing to buy — the MWF housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSL25WGPJBS?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →