Water Filter for the GE GSHS9NGYCCSS (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSHS9NGYCCSS · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

behind the lower fresh-food trim or base grille in most side-by-side layouts

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GSHS9NGYCCSS · Quick Facts

Filter locationbehind the lower fresh-food trim or base grille in most side-by-side layouts

Filter slotMWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSHS9NGYCCSS. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

GSHS9NGYCCSS specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it behind the lower fresh-food trim or base grille in most side-by-side layouts, the same estate every side-by-side variant refrigerator in this family uses. It is a twist-lock bay: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

The small print owners learn the hard way: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. Decode the plate and the parts question answers itself: in this catalog GSH is the side-by-side variant marker; internal layouts vary, the bay layout does not. That SS suffix is trim-level shorthand. GE kept the MWF bay common to every finish in the line.

GSH vs GSS — what the prefix tells you

Two prefixes, two missions: GSH covers side-by-side variant, while GSS covers side-by-side. The cartridge line is usually shared across both — order by chassis, not by door count. One more anchor for the parts search: this chassis drinks from the MWF family, one of the most cross-referenced cartridges in the GE catalog.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSHS9NGYCCSS filter questions

GE GSHS9NGYCCSS: how do I clear the change-filter light?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GSHS9NGYCCSS owner’s manual page for filter status.

Is a bypass plug required for the GSHS9NGYCCSS when the cartridge is removed?

The bay self-seals: with no cartridge the GSHS9NGYCCSS still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSHS9NGYCCSS?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →