Home › Refrigerator Water Filters › GE › GSE28VHBATWW
Water Filter for the GE GSE28VHBATWW (MSWF)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
GSE28VHBATWW specifics — where the filter actually lives
The GSE28VHBATWW carries its water filter in the lower fresh-food zone in most side-by-side layouts, knee height or below, a spot that survives trim changes across the GSE run. The seat is a twist-in design — the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.
Field notes: a stiff first removal on builds that sat on the same cartridge for years, and an indicator light that wants a manual reset after a non-OEM cartridge is seated. One prefix, one chassis family: GSE typically codes for side-by-side variant machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. WW is finish coding: handles, colors, panel options — none of it reaches the filter bay.
GSE vs GSS — what the prefix tells you
GSE or GSS: the badge difference that does (and does not) change the filter order. The side-by-side variant/side-by-side split tracks the GSE/GSS prefixes — cartridge fit follows the water path, not the label on the door. Capacity check: the 28 cu ft in the code is the box size, and bigger boxes push more water through the same cartridge between swaps.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
GSE28VHBATWW filter questions
How to reset the water filter indicator: GE GSE28VHBATWW?
The reset is a press-and-hold on the filter control with the cartridge in place; check the GSE28VHBATWW owner’s manual for where that control sits on your panel.
GSE28VHBATWW with no water filter installed — safe, or does it need a bypass?
No — run it empty if you like; the MSWF bay needs no bypass plug, it simply passes water through untreated.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MSWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my GSE28VHBATWW?
Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →