Home › Refrigerator Water Filters › GE › GSE28VGBACSS

GSE28VGBACSS
Exact-Fit Model Guide

Water Filter for the GE GSE28VGBACSS (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSE28VGBACSS replacement water filter cartridge
Replacement cartridge for this model
GSE28VGBACSS · Quick Facts
TYPE
refrigerator
YEARS MADE
—
FILTER LOCATION
in the lower fresh-food zone in most side-by-side layouts, knee height or below
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
GSE28VGBACSS · Quick Facts
Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSE28VGBACSS. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

GSE28VGBACSS specifics — where the filter actually lives

On the GSE28VGBACSS, the cartridge in the lower fresh-food zone in most side-by-side layouts, knee height or below, a spot that survives trim changes across the GSE run. This is a twist-style bay, the friendlier design: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Order-day practicalities: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. Read the prefix and the maintenance writes itself: count on GSE to place this unit among side-by-side variant builds; that placement carries the water-path geometry with it. SS is finish coding: handles, colors, panel options — none of it reaches the filter bay.

GSE vs GSS — what the prefix tells you

The GSE prefix sits next to GSS in the catalog and the split is cabinet mission: GSE marks side-by-side variant builds and GSS marks side-by-side builds. Cross-checking the prefix before ordering is faster than returning the wrong cartridge. Capacity check: the 28 cu ft in the code is the box size, and bigger boxes push more water through the same cartridge between swaps.

Swap it in 5 minutes

Installing the replacement water filter in the GSE28VGBACSS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSE28VGBACSS filter questions

Reset procedure for the change-filter alert on the GSE28VGBACSS?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the GSE28VGBACSS manual maps the control by panel type.

Does the GE GSE28VGBACSS need a bypass plug when the filter is out?

No cap needed — the MSWF bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSE28VGBACSS?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →