Home › Refrigerator Water Filters › GE › GSE26HSEDHSS
Water Filter for the GE GSE26HSEDHSS (MWF)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
GSE26HSEDHSS specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, the same estate every side-by-side variant refrigerator in this family uses. The seat is a twist-in design — the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.
The recurring owner notes: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Decode the plate and the parts question answers itself: GSE generally indicates the side-by-side variant family, so cross-referencing cartridges by chassis rather than by door style usually keeps you out of the wrong-parts queue. That SS suffix is trim-level shorthand. GE kept the MWF bay common to every finish in the line.
GSE vs GSS — what the prefix tells you
GSE or GSS: the badge difference that does (and does not) change the filter order. The door count differs — side-by-side variant against side-by-side — but the bay and the cartridge order do not. the 26 cubic feet figure in the code is the household size proxy; larger households breach the rated gallons before the calendar does.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
GSE26HSEDHSS filter questions
Clearing the filter status light on a GE GSE26HSEDHSS?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GSE26HSEDHSS owner’s manual page for filter status.
Is a bypass plug required for the GSE26HSEDHSS when the cartridge is removed?
The bay self-seals: with no cartridge the GSE26HSEDHSS still dispenses, just unfiltered. No bypass plug exists for this line.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my GSE26HSEDHSS?
Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM MWF | RECOMMENDEDMWF Replacement Water Filter · 1-Pack – ClearFit | MWF Replacement Water Filter · 3-Pack – ClearFit | MWF Replacement Water Filter · 6-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $14.99 | $37.47 | $67.44 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →