Water Filter for the GE GSE26GBCBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSE26GBCBB · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GSE26GBCBB · Quick Facts

Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

Filter slotMWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSE26GBCBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

GSE26GBCBB specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, the same estate every side-by-side variant refrigerator in this family uses. The seat is a twist-in design — release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Two quirks worth knowing before you order: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. Decode the plate and the parts question answers itself: it usually places the machine in the side-by-side variant family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. BB is finish coding: handles, colors, panel options — none of it reaches the filter bay.

GSE vs GSS — what the prefix tells you

The catalog pairs GSE with GSS, and the split matters at order time: The side-by-side variant/side-by-side split tracks the GSE/GSS prefixes — cartridge fit follows the water path, not the label on the door. The two digits after the letters are the cabinet size: this is a 26 cu ft refrigerator, which sets how much dispenser work the cartridge does between changes.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSE26GBCBB filter questions

Filter light reset on the GE GSE26GBCBB — how?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the GSE26GBCBB manual’s filter-status page has the exact spot.

Is a bypass plug required for the GSE26GBCBB when the cartridge is removed?

No cap needed — the MWF bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSE26GBCBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →