Water Filter for the GE GSE25MGTJCBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSE25MGTJCBB · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

bottom of the fresh-food column or at the grille line in most side-by-side builds

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GSE25MGTJCBB · Quick Facts

Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds

Filter slotMWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSE25MGTJCBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

GSE25MGTJCBB specifics — where the filter actually lives

The GSE25MGTJCBB carries its water filter bottom of the fresh-food column or at the grille line in most side-by-side builds, the same estate every side-by-side variant refrigerator in this family uses. It is a twist-lock bay: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Before you click buy, two things: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. Read the prefix and the maintenance writes itself: it usually marks a side-by-side variant layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. The BB tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

GSE vs GSS — what the prefix tells you

Catalog shorthand: side-by-side variant on the GSE side, side-by-side on the GSS side — the parts catalog runs the same cartridge across both. Size class 25 cu ft — worth knowing because a full household works a cartridge harder than the rated six months assumes.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSE25MGTJCBB filter questions

How to reset the water filter indicator: GE GSE25MGTJCBB?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the GSE25MGTJCBB manual’s filter section has the exact control for your trim.

Is a bypass plug required for the GSE25MGTJCBB when the cartridge is removed?

No — the MWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSE25MGTJCBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →