Water Filter for the GE GSE25GSHSS (XWF)

Your GE refrigerator takes the XWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSE25GSHSS · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

bottom of the fresh-food column or at the grille line in most side-by-side builds

FILTER SLOT

XWF/MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GSE25GSHSS · Quick Facts

Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds

Filter slotXWF/MWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GSE25GSHSS. Cross-checked against GE service documentation — this model family uses the XWF bay with Note: RFID adjacency: XWF/XWFE replaces XWF only, NOT interchangeable with RPWFE (RFID) – see guide.

Not your model? Check the finder →

GSE25GSHSS specifics — where the filter actually lives

Where the filter actually lives: bottom of the fresh-food column or at the grille line in most side-by-side builds, the same estate every side-by-side variant refrigerator in this family uses. It is a twist-lock bay: the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

Field notes: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. Decode the plate and the parts question answers itself: the GSE tag is how the catalog sorts side-by-side variant machines — carry it into any fit checker and the right cartridge line follows. SS is finish coding: handles, colors, panel options — none of it reaches the filter bay.

GSE vs GSS — what the prefix tells you

The catalog pairs GSE with GSS, and the split matters at order time: GSE means side-by-side variant, GSS means side-by-side. For filter shopping the distinction matters less than you would think — same line, different cabinet. read the code as 25 cu ft of capacity, which tells you the cartridge’s real workload between changes.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSE25GSHSS filter questions

Clearing the filter status light on a GE GSE25GSHSS?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the GSE25GSHSS manual’s filter section has the exact control for your trim.

Does the GE GSE25GSHSS need a bypass plug when the filter is out?

No — run it empty if you like; the XWF bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM XWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSE25GSHSS?

Every six months or at the rated gallon capacity, whichever comes first — the XWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM XWF cartridge

This bay takes the OEM XWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →