HomeRefrigerator Water FiltersGEGSE22ETHBWW

GSE22ETHBWW
Exact-Fit Model Guide

Water Filter for the GE GSE22ETHBWW (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSE22ETHBWW · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GSE22ETHBWW · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GSE22ETHBWW. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

GSE22ETHBWW specifics — where the filter actually lives

On the GSE22ETHBWW, the cartridge bottom of the fresh-food column or at the grille line in most side-by-side builds, a deliberate placement that keeps the swap away from the door seals and drawer rails. It is a twist-lock bay: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

The small print owners learn the hard way: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. GSE reads as a chassis statement rather than a trim code: generally a side-by-side variant machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Finish codes such as WW change the look, not the plumbing — order the cartridge by model, ignore the finish letter.

GSE vs GSS — what the prefix tells you

The GSE prefix sits next to GSS in the catalog and the split is cabinet mission: side-by-side variant versus side-by-side. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. Size class 22 cubic feet — worth knowing because a full household works a cartridge harder than the rated six months assumes.

Swap it in 5 minutes

Installing the water filter in the GSE22ETHBWW (MWF bay)
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSE22ETHBWW filter questions

Filter light reset on the GE GSE22ETHBWW — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GSE22ETHBWW owner’s manual lists the button location for your control panel.

Does the GE GSE22ETHBWW need a bypass plug when the filter is out?

You can, but unfiltered — the MWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSE22ETHBWW?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

GUIDE · 4,400 SEARCHES/MO

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

GUIDE · 2,300 SEARCHES/MO

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM · 27,100 SEARCHES/MO

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →