Home › Refrigerator Water Filters › GE › GSE22ETHBBB
Water Filter for the GE GSE22ETHBBB (MWF)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
GSE22ETHBBB specifics — where the filter actually lives
On the GSE22ETHBBB, the cartridge in the lower fresh-food zone in most side-by-side layouts, knee height or below, so expect to clear one shelf edge before you have working room. Mechanically it is a quarter-turn twist-in seat: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.
Before you click buy, two things: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. Read the prefix and the maintenance writes itself: it usually places the machine in the side-by-side variant family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. Finish codes such as BB change the look, not the plumbing — order the cartridge by model, ignore the finish letter.
GSE vs GSS — what the prefix tells you
Know your GSE from your GSS and the cartridge question halves: Ordering by prefix works because GSE means side-by-side variant and GSS means side-by-side in this catalog — and the cartridge pool overlaps both. The digits in the model number read as cabinet capacity (22 cubic feet), a decent proxy for how hard the filter works in daily service.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
GSE22ETHBBB filter questions
GE GSE22ETHBBB: how do I clear the change-filter light?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GSE22ETHBBB owner’s manual lists the button location for your control panel.
GSE22ETHBBB with no water filter installed — safe, or does it need a bypass?
No cap needed — the MWF bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my GSE22ETHBBB?
Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM MWF | RECOMMENDEDMWF Replacement Water Filter · 1-Pack – ClearFit | MWF Replacement Water Filter · 3-Pack – ClearFit | MWF Replacement Water Filter · 6-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $14.99 | $37.47 | $67.44 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →