HomeRefrigerator Water FiltersGEGSE22ESHBSS

GSE22ESHBSS
Exact-Fit Model Guide

Water Filter for the GE GSE22ESHBSS (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GSE22ESHBSS replacement water filter cartridge
Replacement cartridge for this model
GSE22ESHBSS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GSE22ESHBSS · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GSE22ESHBSS. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

GSE22ESHBSS specifics — where the filter actually lives

The GSE22ESHBSS carries its water filter at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, so expect to clear one shelf edge before you have working room. It is a twist-lock bay: the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

Two quirks worth knowing before you order: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. Prefix literacy pays here: in this catalog GSE is the side-by-side variant marker; internal layouts vary, the bay layout does not. Trailing letters like SS denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

GSE vs GSS — what the prefix tells you

The GSE/GSS pair divides this family by layout — Chassis first: side-by-side variant (GSE) versus side-by-side (GSS). The shared cartridge line covers both without adaptation. read the code as 22 cubic feet of capacity, which tells you the cartridge’s real workload between changes.

Swap it in 5 minutes

Installing the replacement water filter in the GSE22ESHBSS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSE22ESHBSS filter questions

How to reset the water filter indicator: GE GSE22ESHBSS?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the GSE22ESHBSS manual’s filter section has the exact control for your trim.

Is a bypass plug required for the GSE22ESHBSS when the cartridge is removed?

No — run it empty if you like; the MWF bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GSE22ESHBSS?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →