Water Filter for the GE GSC23KSTESS (MWF)

GSC23KSTESS specifics — where the filter actually lives

Where the filter actually lives: bottom of the fresh-food column or at the grille line in most side-by-side builds, the same estate every side-by-side family refrigerator in this family uses. The seat is a twist-in design — one twist to release, one to lock; between them you are holding the entire service procedure.

Order-day practicalities: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Decode the plate and the parts question answers itself: GS typically codes for side-by-side family machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. Finish letter sets like SS never alter the bay; the MWF line fits the whole set.

GS vs GSS — what the prefix tells you

The GS/GSS pair divides this family by layout — Ordering by prefix works because GS means side-by-side family and GSS means side-by-side in this catalog — and the cartridge pool overlaps both. call it a 23 cu ft box — which is why this cartridge works for a living rather than sitting decorative.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSC23KSTESS filter questions