HomeRefrigerator Water FiltersGEGFE29HSDSS

GFE29HSDSS
Exact-Fit Model Guide

Water Filter for the GE GFE29HSDSS (RPWFE)

Your GE refrigerator takes the RPWFE slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GFE29HSDSS replacement water filter cartridge
Replacement cartridge for this model
GFE29HSDSS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
RPWFE bay (RFID)
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GFE29HSDSS · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotRPWFE bay (RFID)
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GFE29HSDSS. Cross-checked against GE service documentation — this model family uses the RPWFE bay with Note: RFID chip required (GE premium lines) – see compatibility guide.

GFE29HSDSS specifics — where the filter actually lives

Where the filter actually lives: in the fresh-food compartment — exact spot varies by dispenser layout, a spot that survives trim changes across the refrigerator run. This is a twist-style bay, the friendlier design: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Owners of the GFE29HSDSS report the same friction points: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. What pins the parts choice down is the media line: this chassis drinks from the RPWFE family, one of the most cross-referenced cartridges in the GE catalog. Trailing letters like SS denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

Reading the GFE29HSDSS model code — what the digits tell you

Cabinet decode: 29 cubic feet — the number that tells you whether this cartridge feeds a family-size dispenser or a compact one. The model code varies with trim, but the parts logic does not: trim codes shuffle doors and finishes; the RPWFE cartridge family is the fixed point.

Swap it in 5 minutes

Installing the replacement water filter in the GFE29HSDSS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GFE29HSDSS filter questions

Filter light reset on the GE GFE29HSDSS — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GFE29HSDSS owner’s manual lists the button location for your control panel.

Is a bypass plug required for the GFE29HSDSS when the cartridge is removed?

Chip-locked line: the bay validates the cartridge electronically, so stick to the RPWFE-compatible list in the compatibility guide.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM RPWFE cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GFE29HSDSS?

Every six months or at the rated gallon capacity, whichever comes first — the RPWFE class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM RPWFE cartridge

This bay takes the OEM RPWFE. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →