Water Filter for the GE GFE28GSKBSS (RPWFE)

GFE28GSKBSS specifics — where the filter actually lives

On the GFE28GSKBSS, the cartridge in the fresh-food compartment, placement dependent on the dispenser package, a spot that survives trim changes across the refrigerator run. It is a twist-lock bay: one twist to release, one to lock; between them you are holding the entire service procedure.

Before you click buy, two things: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Under the cabinet differences one thing holds: the GFE28GSKBSS shares its water path with the whole RPWFE generation — the cartridge is the common denominator, not the door count. Finish letter sets like SS never alter the bay; the RPWFE line fits the whole set.

Reading the GFE28GSKBSS model code — what the digits tell you

Read the code as 28 cubic feet of capacity, which tells you the cartridge’s real workload between changes. Cross-checking by chassis pays off here: every trim of this model resolves to the RPWFE family, OEM and certified alternative alike.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GFE28GSKBSS filter questions