GLRS264ZAB2
Exact-Fit Model Guide

Water Filter for the Frigidaire GLRS264ZAB2 (WF2CB)

Your Frigidaire refrigerator takes the WF2CB slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GLRS264ZAB2 replacement water filter cartridge
Replacement cartridge for this model
GLRS264ZAB2 · Quick Facts
TYPE
refrigerator
YEARS MADE
—
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
PureSource 2 (WF2CB) bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
GLRS264ZAB2 · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotPureSource 2 (WF2CB) bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GLRS264ZAB2. Cross-checked against Frigidaire service documentation — this model family uses the WF2CB bay with no chip or bypass restrictions.

GLRS264ZAB2 specifics — where the filter actually lives

On the GLRS264ZAB2, the cartridge at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically the GLRS264ZAB2 uses a twist-in cartridge: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Practical notes from the install forums: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The badge reads GLRS264ZAB2, but the chassis reads GLRS: count on GLRS to place this unit among side-by-side builds; that placement carries the water-path geometry with it. The B2 tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

GLRS vs the rest of the catalog — what the prefix tells you

GLRS or the rest of the catalog: the badge difference that does (and does not) change the filter order. GLRS answers to side-by-side; the rest of the catalog answers to the neighboring layout; the water-filter answer is shared. call it a 26 cubic feet box — which is why this cartridge works for a living rather than sitting decorative.

Swap it in 5 minutes

Installing the replacement water filter in the GLRS264ZAB2
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GLRS264ZAB2 filter questions

Filter light reset on the Frigidaire GLRS264ZAB2 — how?

Lock in the new cartridge first, then hold the reset control for a few seconds — the GLRS264ZAB2 manual documents the button for each panel variant.

Can I run the Frigidaire GLRS264ZAB2 with no cartridge installed?

No — run it empty if you like; the WF2CB bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a Frigidaire refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM WF2CB cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GLRS264ZAB2?

Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM WF2CB cartridge

This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →