GLRS233ZDW2
Exact-Fit Model Guide

Water Filter for the Frigidaire GLRS233ZDW2 (WF2CB)

Your Frigidaire refrigerator takes the WF2CB slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GLRS233ZDW2 replacement water filter cartridge
Replacement cartridge for this model
GLRS233ZDW2 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
PureSource 2 (WF2CB) bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GLRS233ZDW2 · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotPureSource 2 (WF2CB) bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GLRS233ZDW2. Cross-checked against Frigidaire service documentation — this model family uses the WF2CB bay with no chip or bypass restrictions.

GLRS233ZDW2 specifics — where the filter actually lives

The filter bay on the GLRS233ZDW2 bottom of the fresh-food column or at the grille line in most side-by-side builds, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.

The recurring owner notes: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. GLRS reads as a chassis statement rather than a trim code: it usually places the machine in the side-by-side family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. W2 is finish coding: handles, colors, panel options — none of it reaches the filter bay.

GLRS vs the rest of the catalog — what the prefix tells you

The GLRS prefix sits next to the rest of the catalog in the catalog and the split is cabinet mission: split by cabinet mission (side-by-side versus the neighboring layout), joined by cartridge line — that is the GLRS/the rest of the catalog story. read the code as 23 cu ft of capacity, which tells you the cartridge’s real workload between changes.

Swap it in 5 minutes

Installing the replacement water filter in the GLRS233ZDW2
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GLRS233ZDW2 filter questions

Clearing the filter status light on a Frigidaire GLRS233ZDW2?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GLRS233ZDW2 owner’s manual lists the button location for your control panel.

Is a bypass plug required for the GLRS233ZDW2 when the cartridge is removed?

No cap needed — the WF2CB bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a Frigidaire refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM WF2CB cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GLRS233ZDW2?

Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM WF2CB cartridge

This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →