Water Filter for the Frigidaire GLHS68EGPW4 (WF2CB)

GLHS68EGPW4 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it behind the lower fresh-food trim or base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the GLHS68EGPW4 uses a twist-in cartridge: the cartridge drops into the keyed seat and locks with a short quarter turn.

The small print owners learn the hard way: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. Decode the plate and the parts question answers itself: count on GLHS to place this unit among side-by-side builds; that placement carries the water-path geometry with it. Finish letter sets like W4 never alter the bay; the WF2CB line fits the whole set.

GLHS vs FFSS — what the prefix tells you

Both GLHS and FFSS sit in the side-by-side class — the split inside the class is generation and trim era, not cartridge line. Whatever the badge on the door says, the parts reality is the GLHS68EGPW4 shares its water path with the whole WF2CB generation — the cartridge is the common denominator, not the door count.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GLHS68EGPW4 filter questions