Water Filter for the Frigidaire GLHS68EGB1 (WF2CB)

Your Frigidaire refrigerator takes the WF2CB slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GLHS68EGB1 · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

in the lower fresh-food zone in most side-by-side layouts, knee height or below

FILTER SLOT

PureSource 2 (WF2CB) bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

GLHS68EGB1 · Quick Facts

Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below

Filter slotPureSource 2 (WF2CB) bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GLHS68EGB1. Cross-checked against Frigidaire service documentation — this model family uses the WF2CB bay with no chip or bypass restrictions.

Not your model? Check the finder →

GLHS68EGB1 specifics — where the filter actually lives

Where the filter actually lives: in the lower fresh-food zone in most side-by-side layouts, knee height or below — usually a kneeling-height or shoulder-height swap, not a teardown. This is a twist-style bay, the friendlier design: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Order-day practicalities: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. The GLHS prefix is the tell: it usually marks a side-by-side layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. Trailing letters like B1 denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

GLHS vs FFSS — what the prefix tells you

The side-by-side family keeps one water path across GLHS and FFSS; nothing about the cartridge changes between them. Whatever the badge on the door says, the parts reality is the GLHS68EGB1 shares its water path with the whole WF2CB generation — the cartridge is the common denominator, not the door count.

Swap it in 5 minutes

How to install the water filter in the GLHS68EGB1

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GLHS68EGB1 filter questions

Filter light reset on the Frigidaire GLHS68EGB1 — how?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GLHS68EGB1 owner’s manual page for filter status.

GLHS68EGB1 with no water filter installed — safe, or does it need a bypass?

The bay self-seals: with no cartridge the GLHS68EGB1 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Frigidaire refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM WF2CB cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GLHS68EGB1?

Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM WF2CB cartridge

This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →