Home › Refrigerator Water Filters › Frigidaire › GLHS65EHSB1
Water Filter for the Frigidaire GLHS65EHSB1 (WF2CB)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
We cross-checked the GLHS65EHSB1 against every cartridge family that fits its bay. ClearFit versions are on the way — get notified when they land, or find your exact fit now.
Find filters for your fridge →✓
GLHS65EHSB1 specifics — where the filter actually lives
The GLHS65EHSB1 carries its water filter in the lower fresh-food zone in most side-by-side layouts, knee height or below, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.
Order-day practicalities: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. The badge reads GLHS65EHSB1, but the chassis reads GLHS: it usually places the machine in the side-by-side family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. Finish codes such as B1 change the look, not the plumbing — order the cartridge by model, ignore the finish letter.
GLHS vs FFSS — what the prefix tells you
Two prefixes, one side-by-side mission: GLHS and FFSS break along production generations, and the water path is common to both. What pins the parts choice down is the media line: the WF2CB cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
GLHS65EHSB1 filter questions
Frigidaire GLHS65EHSB1: how do I clear the change-filter light?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GLHS65EHSB1 owner’s manual page for filter status.
Frigidaire GLHS65EHSB1: bypass plug needed without a filter?
No bypass needed: the WF2CB bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a Frigidaire refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM WF2CB cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my GLHS65EHSB1?
Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →