Water Filter for the Frigidaire GLHS39EHPW3
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
GLHS39EHPW3 specifics — where the filter actually lives
The GLHS39EHPW3 carries its water filter in the lower fresh-food zone in most side-by-side layouts, knee height or below, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: one twist to release, one to lock; between them you are holding the entire service procedure.
Owners of the GLHS39EHPW3 report the same friction points: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. The GLHS in GLHS39EHPW3 is doing real work: it usually places the machine in the side-by-side family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. That W3 suffix is trim-level shorthand. Frigidaire kept the WF2CB bay common to every finish in the line.
GLHS vs FFSS — what the prefix tells you
Two prefixes, one side-by-side mission: GLHS and FFSS break along production generations, and the water path is common to both. Cabinet decode: 39 cu ft — the number that tells you whether this cartridge feeds a family-size dispenser or a compact one.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
How do I reset the filter light on the Frigidaire GLHS39EHPW3?
Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the GLHS39EHPW3 manual’s filter-status page has the exact spot.
Can I run the Frigidaire GLHS39EHPW3 with no cartridge installed?
No — the WF2CB bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.
Are off-brand filters safe for a Frigidaire refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM WF2CB cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my GLHS39EHPW3?
Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| OEM EveryDrop EDR1RXD1 | RECOMMENDEDClearFit Standard CF-1001 | ClearFit Lead-Shield CF-1001P | |
|---|---|---|---|
| Price / filter | $59.99 | $14.99 | $19.99 |
| NSF 42 (chlorine, taste) | ✓ Certified | ✓ Certified | ✓ Certified |
| NSF 53 (lead, cysts) | ✓ Certified | — Not tested | ✓ 99.2% lead reduction |
| Capacity | 200 gal / 6 mo | 200 gal / 6 mo | 200 gal / 6 mo |
| Filter media | Carbon block | Coconut carbon | Carbon + ion-ex |
| Subscribe & Save | — | ✓ 15% off, cancel anytime | ✓ 15% off |
| Order | Not sold here — $59.99 at EveryDrop | Add to Cart | Add to Cart |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
Also due on this fridge
Second bay · Air filter slot
EveryDrop PAULTRA Air Filter ×2
Fits W10311524 · reduces food odors · replace every 6 months
$35.98
Bundle & save 10%
Full refresh kit — CF-1001 3-pack + PAULTRA ×2
Everything this fridge needs for the next 6 months, one shipment
$64.98
More models using this filter
FFHS2313LSB
FFHS2622MB3
FPSC2278UF8
FRS6LF7FW0
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →