GHSC39ETEW2
Exact-Fit Model Guide

Water Filter for the Frigidaire GHSC39ETEW2 (WF2CB)

Your Frigidaire refrigerator takes the WF2CB slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GHSC39ETEW2 replacement water filter cartridge
Replacement cartridge for this model
GHSC39ETEW2 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
PureSource 2 (WF2CB) bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GHSC39ETEW2 · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotPureSource 2 (WF2CB) bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GHSC39ETEW2. Cross-checked against Frigidaire service documentation — this model family uses the WF2CB bay with no chip or bypass restrictions.

GHSC39ETEW2 specifics — where the filter actually lives

On the GHSC39ETEW2, the cartridge at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the GHSC39ETEW2 uses a twist-in cartridge: one twist to release, one to lock; between them you are holding the entire service procedure.

Two quirks worth knowing before you order: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. GHSC reads as a chassis statement rather than a trim code: generally a side-by-side family machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. W2 is finish coding: handles, colors, panel options — none of it reaches the filter bay.

GHSC vs FFSS — what the prefix tells you

Know your GHSC from your FFSS and the cartridge question halves: side-by-side family on the GHSC side, side-by-side on the FFSS side — the parts catalog runs the same cartridge across both. call it a 39 cubic feet box — which is why this cartridge works for a living rather than sitting decorative.

Swap it in 5 minutes

Installing the replacement water filter in the GHSC39ETEW2
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GHSC39ETEW2 filter questions

How to reset the water filter indicator: Frigidaire GHSC39ETEW2?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the GHSC39ETEW2 manual maps the control by panel type.

Frigidaire GHSC39ETEW2: bypass plug needed without a filter?

No — the WF2CB bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a Frigidaire refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM WF2CB cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GHSC39ETEW2?

Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM WF2CB cartridge

This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →