Water Filter for the Frigidaire FGHB2869LF1 (ULTRAWF)

FGHB2869LF1 specifics — where the filter actually lives

The FGHB2869LF1 carries its water filter upper rear of the fresh-food section in most French-door builds with interior dispensers, a spot that survives trim changes across the FGHB run. It is a twist-lock bay: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

The small print owners learn the hard way: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. One prefix, one chassis family: FGHB on this badge family usually means French-door stock, which is why fit charts list cartridges by chassis code first. Trailing letters like F1 denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

FGHB vs FFHS — what the prefix tells you

Same parts shelf, two cabinet missions — The French-door/side-by-side split tracks the FGHB/FFHS prefixes — cartridge fit follows the water path, not the label on the door. read the code as 28 cu ft of capacity, which tells you the cartridge’s real workload between changes.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

FGHB2869LF1 filter questions