Water Filter for the Frigidaire FGHB2868TD3 (EPTWFU01)

FGHB2868TD3 specifics — where the filter actually lives

On the FGHB2868TD3, the cartridge inside the fresh-food cavity, upper zone in most French-door builds, a spot that survives trim changes across the FGHB run. This is a twist-style bay, the friendlier design: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

The small print owners learn the hard way: a first removal that fights a set o-ring, and a status light that needs a manual hold-to-reset before it acknowledges the new cartridge. FGHB reads as a chassis statement rather than a trim code: the FGHB tag is how the catalog sorts French-door machines — carry it into any fit checker and the right cartridge line follows. Finish letter sets like D3 never alter the bay; the EPTWFU01 line fits the whole set.

FGHB vs FFHS — what the prefix tells you

FGHB or FFHS: the badge difference that does (and does not) change the filter order. FGHB covers French-door, while FFHS covers side-by-side. The cartridge line is usually shared across both — order by chassis, not by door count. The digits in the model number read as cabinet capacity (28 cu ft), a decent proxy for how hard the filter works in daily service.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

FGHB2868TD3 filter questions