Home › Refrigerator Water Filters › Frigidaire › EI28BS56IB3
Water Filter for the Electrolux EI28BS56IB3 (WF2CB)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
EI28BS56IB3 specifics — where the filter actually lives
Where the filter actually lives: in the fresh-food compartment, typically the upper back wall in most French-door layouts, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.
The small print owners learn the hard way: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. Prefix literacy pays here: count on EI to place this unit among French-door builds; that placement carries the water-path geometry with it. That B3 suffix is trim-level shorthand. Electrolux kept the WF2CB bay common to every finish in the line.
EI vs EW — what the prefix tells you
EI or EW: the badge difference that does (and does not) change the filter order. EI marks French-door builds and EW marks Wave-Touch Electrolux French-door builds. Cross-checking the prefix before ordering is faster than returning the wrong cartridge. 28 cubic feet of cabinet — the dispenser sees heavy traffic at that size, and heavy traffic ages cartridges faster.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
EI28BS56IB3 filter questions
EI28BS56IB3 filter light will not turn off — what is the reset step?
The reset is a press-and-hold on the filter control with the cartridge in place; check the EI28BS56IB3 owner’s manual for where that control sits on your panel.
Will the Electrolux EI28BS56IB3 dispense water without a filter cartridge?
You can, but unfiltered — the WF2CB bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for an Electrolux refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM WF2CB cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my EI28BS56IB3?
Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →