EI27BS16JW3
Exact-Fit Model Guide

Water Filter for the Electrolux EI27BS16JW3 (WF2CB)

Your Frigidaire refrigerator takes the WF2CB slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

EI27BS16JW3 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
upper rear of the fresh-food section in most French-door builds with interior dispensers
FILTER SLOT
PureSource 2 (WF2CB) bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
EI27BS16JW3 · Quick Facts
Filter locationupper rear of the fresh-food section in most French-door builds with interior dispensers
Filter slotPureSource 2 (WF2CB) bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for EI27BS16JW3. Cross-checked against Frigidaire service documentation — this model family uses the WF2CB bay with no chip or bypass restrictions.

EI27BS16JW3 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it upper rear of the fresh-food section in most French-door builds with interior dispensers — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.

Owners of the EI27BS16JW3 report the same friction points: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. The EI prefix is the tell: EI generally indicates the French-door family, so cross-referencing cartridges by chassis rather than by door style usually keeps you out of the wrong-parts queue. The W3 tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

EI vs EW — what the prefix tells you

EI or EW: the badge difference that does (and does not) change the filter order. split by cabinet mission (French-door versus Wave-Touch Electrolux French-door), joined by cartridge line — that is the EI/EW story. the 27 cubic feet in the code is the size class; households that size move enough water that the six-month interval is worth honoring.

Swap it in 5 minutes

  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

EI27BS16JW3 filter questions

How to reset the water filter indicator: Electrolux EI27BS16JW3?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the EI27BS16JW3 manual’s filter section has the exact control for your trim.

EI27BS16JW3 with no water filter installed — safe, or does it need a bypass?

The bay self-seals: with no cartridge the EI27BS16JW3 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for an Electrolux refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM WF2CB cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my EI27BS16JW3?

Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM WF2CB cartridge

This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

GUIDE · 4,400 SEARCHES/MO

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

GUIDE · 2,300 SEARCHES/MO

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM · 27,100 SEARCHES/MO

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →