EI27BS16JS0
Exact-Fit Model Guide

Water Filter for the Electrolux EI27BS16JS0 (WF2CB)

Your Frigidaire refrigerator takes the WF2CB slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

EI27BS16JS0 replacement water filter cartridge
Replacement cartridge for this model
EI27BS16JS0 · Quick Facts
TYPE
refrigerator
YEARS MADE
—
FILTER LOCATION
in the fresh-food compartment, typically the upper back wall in most French-door layouts
FILTER SLOT
PureSource 2 (WF2CB) bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
EI27BS16JS0 · Quick Facts
Filter locationin the fresh-food compartment, typically the upper back wall in most French-door layouts
Filter slotPureSource 2 (WF2CB) bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for EI27BS16JS0. Cross-checked against Frigidaire service documentation — this model family uses the WF2CB bay with no chip or bypass restrictions.

EI27BS16JS0 specifics — where the filter actually lives

The EI27BS16JS0 carries its water filter in the fresh-food compartment, typically the upper back wall in most French-door layouts, a spot that survives trim changes across the EI run. It is a twist-lock bay: the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

Before you click buy, two things: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. One prefix, one chassis family: the EI tag is how the catalog sorts French-door machines — carry it into any fit checker and the right cartridge line follows. That S0 suffix is trim-level shorthand. Electrolux kept the WF2CB bay common to every finish in the line.

EI vs EW — what the prefix tells you

Two prefixes, two missions: EI machines are French-door; EW machines are Wave-Touch Electrolux French-door. Both draw from the same cartridge line, which is why fit charts list them together. the 27 cubic feet figure in the code is the household size proxy; larger households breach the rated gallons before the calendar does.

Swap it in 5 minutes

Installing the replacement water filter in the EI27BS16JS0
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

EI27BS16JS0 filter questions

Filter light reset on the Electrolux EI27BS16JS0 — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the EI27BS16JS0 owner’s manual lists the button location for your control panel.

Will the Electrolux EI27BS16JS0 dispense water without a filter cartridge?

No — the WF2CB bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for an Electrolux refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM WF2CB cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my EI27BS16JS0?

Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM WF2CB cartridge

This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →