Home › Refrigerator Water Filters › Frigidaire › EI26SS30JW0
Water Filter for the Electrolux EI26SS30JW0 (WF2CB)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
EI26SS30JW0 specifics — where the filter actually lives
The filter bay on the EI26SS30JW0 high on the fresh-food side in most French-door layouts — upper back or left wall, the same estate every French-door refrigerator in this family uses. Mechanically the EI26SS30JW0 uses a twist-in cartridge: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
Owners of the EI26SS30JW0 report the same friction points: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The EI in EI26SS30JW0 is doing real work: it usually marks a French-door layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. Trim code W0: cosmetic variants of one chassis, one cartridge family.
EI vs EW — what the prefix tells you
Same parts shelf, two cabinet missions — EI means French-door, EW means Wave-Touch Electrolux French-door. For filter shopping the distinction matters less than you would think — same line, different cabinet. the 26 cu ft figure in the code is the household size proxy; larger households breach the rated gallons before the calendar does.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
EI26SS30JW0 filter questions
How do I reset the filter light on the Electrolux EI26SS30JW0?
Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the EI26SS30JW0 manual’s filter-status page has the exact spot.
Electrolux EI26SS30JW0: bypass plug needed without a filter?
You can, but unfiltered — the WF2CB bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for an Electrolux refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM WF2CB cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my EI26SS30JW0?
Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →