DFHS2313MF1
Exact-Fit Model Guide

Water Filter for the Frigidaire DFHS2313MF1 (WF3CB)

Your Frigidaire refrigerator takes the WF3CB slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

DFHS2313MF1 replacement water filter cartridge
Replacement cartridge for this model
DFHS2313MF1 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
PureSource 3 (WF3CB) bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
DFHS2313MF1 · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotPureSource 3 (WF3CB) bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for DFHS2313MF1. Cross-checked against Frigidaire service documentation — this model family uses the WF3CB bay with no chip or bypass restrictions.

DFHS2313MF1 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, placement dependent on the dispenser package — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically it is a quarter-turn twist-in seat: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Field notes: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. The constant across every trim of this machine is the cartridge line — the WF3CB cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. Trailing letters like F1 denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

Reading the DFHS2313MF1 model code — what the digits tell you

Size class 23 cu ft — worth knowing because a full household works a cartridge harder than the rated six months assumes. The stable part of the DFHS2313MF1 story is the water path: the water path is fixed at the WF3CB line — that asymmetry is what makes filter shopping simple.

Swap it in 5 minutes

Installing the replacement water filter in the DFHS2313MF1
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

DFHS2313MF1 filter questions

How do I reset the filter light on the Frigidaire DFHS2313MF1?

The reset is a press-and-hold on the filter control with the cartridge in place; check the DFHS2313MF1 owner’s manual for where that control sits on your panel.

Running the DFHS2313MF1 with an empty filter bay — does it need a cap?

You can, but unfiltered — the WF3CB bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a Frigidaire refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM WF3CB cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my DFHS2313MF1?

Every six months or at the rated gallon capacity, whichever comes first — the WF3CB class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM WF3CB cartridge

This bay takes the OEM WF3CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →