Home › Refrigerator Water Filters › Frigidaire › CRSH268MW2
Water Filter for the Frigidaire CRSH268MW2 (WF3CB)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
We cross-checked the CRSH268MW2 against every cartridge family that fits its bay. ClearFit versions are on the way — get notified when they land, or find your exact fit now.
Find filters for your fridge →✓
CRSH268MW2 specifics — where the filter actually lives
Where the filter actually lives: behind the lower fresh-food trim or base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. The seat is a twist-in design — release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
Practical notes from the install forums: the line is still live when you open the bay, so keep a towel in reach, and expect the filter-status light to need a reset before it believes the new cartridge. One prefix, one chassis family: CRSH on this badge family usually means side-by-side stock, which is why fit charts list cartridges by chassis code first. Trailing letters like W2 denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.
CRSH vs FFSS — what the prefix tells you
CRSH versus FFSS is an era split within side-by-side stock, not a cabinet split — the cartridge family spans both runs. read the code as 26 cubic feet of capacity, which tells you the cartridge’s real workload between changes.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
CRSH268MW2 filter questions
How to reset the water filter indicator: Crosley CRSH268MW2?
The reset is a press-and-hold on the filter control with the cartridge in place; check the CRSH268MW2 owner’s manual for where that control sits on your panel.
Can I run the Crosley CRSH268MW2 with no cartridge installed?
No cap needed — the WF3CB bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a Crosley refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM WF3CB cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my CRSH268MW2?
Every six months or at the rated gallon capacity, whichever comes first — the WF3CB class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM WF3CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →