Water Filter for the Crosley CRSH238MW6 (WF3CB)

CRSH238MW6 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it bottom of the fresh-food column or at the grille line in most side-by-side builds, the same estate every side-by-side refrigerator in this family uses. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

The recurring owner notes: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. One prefix, one chassis family: it usually places the machine in the side-by-side family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. The W6 tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

CRSH vs FFSS — what the prefix tells you

Both CRSH and FFSS sit in the side-by-side class — the split inside the class is generation and trim era, not cartridge line. The two digits after the letters are the cabinet size: this is a 23 cu ft refrigerator, which sets how much dispenser work the cartridge does between changes.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

CRSH238MW6 filter questions