Home › Refrigerator Water Filters › Whirlpool › WRF989SDAH03
Water Filter for the Whirlpool WRF989SDAH03 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
WRF989SDAH03 specifics — where the filter actually lives
Where the filter actually lives: high on the fresh-food side in most French-door layouts — upper back or left wall, a spot that survives trim changes across the WRF run. Mechanically it is a quarter-turn twist-in seat: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
The small print owners learn the hard way: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Decode the plate and the parts question answers itself: WRF is Whirlpool’s French-door bottom-freezer designation proper, and the service literature files every one of these under the same cartridge line. That trailing 03 is the revision counter: WRF chassis revisions share one water path, so the cartridge order never changes with it.
WRF vs WRS — what the prefix tells you
The WRF prefix sits next to WRS in the catalog and the split is cabinet mission: WRF machines are French-door bottom-freezer; WRS machines are side-by-side. Both draw from the same cartridge line, which is why fit charts list them together. Whatever the badge on the door says, the parts reality is the WRF989SDAH03 shares its water path with the whole EDR2RXD2 generation — the cartridge is the common denominator, not the door count.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
WRF989SDAH03 filter questions
Filter light reset on the Whirlpool WRF989SDAH03 — how?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the WRF989SDAH03 owner’s manual lists the button location for your control panel.
WRF989SDAH03 with no water filter installed — safe, or does it need a bypass?
You can, but unfiltered — the EDR2RXD2 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a Whirlpool refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my WRF989SDAH03?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM EDR2RXD2 | RECOMMENDEDEDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit |
|---|---|---|
| Price | OEM list | $17.99 |
| Verified fit | ✓ the bay cartridge | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →