HomeRefrigerator Water FiltersWhirlpoolMFT2776DEH02

MFT2776DEH02
Exact-Fit Model Guide

Water Filter for the Maytag MFT2776DEH02 (EDR2RXD2)

Your Whirlpool refrigerator takes the EDR2RXD2 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFT2776DEH02 replacement water filter cartridge
Replacement cartridge for this model
MFT2776DEH02 · Quick Facts
TYPE
refrigerator
YEARS MADE
2014-2018
FILTER LOCATION
top-left of the fresh-food compartment in most French-door layouts, away from the door bins
FILTER SLOT
EveryDrop Filter 2 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
mft2776deh00
MFT2776DEH02 · Quick Facts
Filter locationtop-left of the fresh-food compartment in most French-door layouts, away from the door bins
Filter slotEveryDrop Filter 2 bay
Replace everyEvery 6 months
Years made2014-2018
Also branded asmft2776deh00
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for MFT2776DEH02. Cross-checked against Whirlpool service documentation — this model family uses the EDR2RXD2 bay with no chip or bypass restrictions.

MFT2776DEH02 specifics — where the filter actually lives

On the MFT2776DEH02, the cartridge top-left of the fresh-food compartment in most French-door layouts, away from the door bins, so expect to clear one shelf edge before you have working room. Mechanically it is a quarter-turn twist-in seat: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Practical notes from the install forums: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. One prefix, one chassis family: MFT generally indicates the French-door family, so cross-referencing cartridges by chassis rather than by door style usually keeps you out of the wrong-parts queue. The 02 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.

MFT vs MSD — what the prefix tells you

Catalog shorthand: French-door builds carry MFT; side-by-side builds carry MSD. Filter-wise the two lines converge on one cartridge family. Model-code reading puts the MFT2776DEH02 at roughly 2014 to 2018 — treat that as approximately right, not a production guarantee.

Swap it in 5 minutes

Installing the replacement water filter in the MFT2776DEH02
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFT2776DEH02 filter questions

Clearing the filter status light on a Maytag MFT2776DEH02?

The reset is a press-and-hold on the filter control with the cartridge in place; check the MFT2776DEH02 owner’s manual for where that control sits on your panel.

Will the Maytag MFT2776DEH02 dispense water without a filter cartridge?

Nothing to buy — the EDR2RXD2 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR2RXD2 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFT2776DEH02?

Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR2RXD2 cartridge

This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →