HomeRefrigerator Water FiltersWhirlpoolMFT2776DEE02

MFT2776DEE02
Exact-Fit Model Guide

Water Filter for the Maytag MFT2776DEE02 (EDR2RXD2)

Your Whirlpool refrigerator takes the EDR2RXD2 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFT2776DEE02 replacement water filter cartridge
Replacement cartridge for this model
MFT2776DEE02 · Quick Facts
TYPE
refrigerator
YEARS MADE
2014-2018
FILTER LOCATION
inside the fresh-food cavity, upper zone in most French-door builds
FILTER SLOT
EveryDrop Filter 2 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
mft2776dee00
MFT2776DEE02 · Quick Facts
Filter locationinside the fresh-food cavity, upper zone in most French-door builds
Filter slotEveryDrop Filter 2 bay
Replace everyEvery 6 months
Years made2014-2018
Also branded asmft2776dee00
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for MFT2776DEE02. Cross-checked against Whirlpool service documentation — this model family uses the EDR2RXD2 bay with no chip or bypass restrictions.

MFT2776DEE02 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it inside the fresh-food cavity, upper zone in most French-door builds, a deliberate placement that keeps the swap away from the door seals and drawer rails. The seat is a twist-in design — release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Owners of the MFT2776DEE02 report the same friction points: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Decode the plate and the parts question answers itself: MFT on this badge family usually means French-door stock, which is why fit charts list cartridges by chassis code first. The 02 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.

MFT vs MSD — what the prefix tells you

The MFT/MSD pair divides this family by layout — Ordering by prefix works because MFT means French-door and MSD means side-by-side in this catalog — and the cartridge pool overlaps both. By model-code convention the MFT2776DEE02 falls around 2014 to 2018; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the MFT2776DEE02
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFT2776DEE02 filter questions

Maytag MFT2776DEE02: how do I clear the change-filter light?

Lock in the new cartridge first, then hold the reset control for a few seconds — the MFT2776DEE02 manual documents the button for each panel variant.

Will the Maytag MFT2776DEE02 dispense water without a filter cartridge?

You can, but unfiltered — the EDR2RXD2 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR2RXD2 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFT2776DEE02?

Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR2RXD2 cartridge

This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →