Home › Refrigerator Water Filters › Whirlpool › MFT2672AEM10
Water Filter for the Maytag MFT2672AEM10 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
MFT2672AEM10 specifics — where the filter actually lives
Where the filter actually lives: upper rear of the fresh-food section in most French-door builds with interior dispensers, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the MFT2672AEM10 uses a twist-in cartridge: seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.
Before you click buy, two things: a stiff first removal on builds that sat on the same cartridge for years, and an indicator light that wants a manual reset after a non-OEM cartridge is seated. Prefix literacy pays here: generally a French-door machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Revision 10 changed trim details, not the water circuit; order with confidence by model stem.
MFT vs MSD — what the prefix tells you
The MFT prefix sits next to MSD in the catalog and the split is cabinet mission: The door count differs — French-door against side-by-side — but the bay and the cartridge order do not. The MFT2672AEM10 decodes to about 2012-2016 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
MFT2672AEM10 filter questions
How to reset the water filter indicator: Maytag MFT2672AEM10?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the MFT2672AEM10 manual’s filter section has the exact control for your trim.
Maytag MFT2672AEM10: bypass plug needed without a filter?
You can, but unfiltered — the EDR2RXD2 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a Maytag refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my MFT2672AEM10?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →